-------------------------------------------------
    The MaxFire Programmable G08 installation Guide      
    -------------------------------------------------

(1) The MaxFire Programmable G08 can support the standard Windows default 
    driver. Any user may use MaxFire Programmable G08 without the specific 
    driver.


(2) To support the additional functionlality regarding X-axis(Y-axis), 
    8-Buttons, or keyboard simulation, you are supposed to use the MaxFire 
    Programmable G08 setup diskette to complete installation. 

    If this is the first time you install the MaxFire Programmable G08 
    product, please take the following steps:

    <1>.Plug the MaxFire Programmable G08 in the game port.
    <2>.Running the MaxFire Programmable G08 setup diskette.
    <3>.After system rebooting,  you may need to calibrate the MaxFire 
        Programmable G08 from the <Game Controllers> in the Control Panel. 
        While adding the "Genius MaxFire Programmable G08" driver from the 
        Game Controllers list, DO NOT PRESS ANY BUTTON OF THE MAXFIRE
        PROGRAMMABLE G08. 
        
        If there is the "OK" status displayed on the list, you are 
        able to do the calibration as usual. 


<Note>: You have to follow the installation procedure above to prevent 
        your MaxFire Programmable G08 from the unexpected disaster. 
        If you fail to calibrate the MaxFire Programmable G08, please 
        remember to re-install the MaxFire Programmable G08 driver again.