VIA IDE Accelerator Driver Installation Guide
Updated:
. Application License
Agreement
. Distribution
Package Contents
The VIA Storage Port Bus driver is a high
performance IDE ATA/ATAPI driver that will help your system to gain higher
performance on business application.
Support device types are as below:
n
ATA Device: hard disk
n
ATAPI device: CD/DVD DOM, CD/DVD
RW, Tape, ZIP, MO, ATAPI type CF media
Support transmission mode:
n
PIO mode 0, 1, 2, 3, 4
n
Multiword DMA mode 0, 1, 2
n
Ultra DMA mode 0, 1, 2, 3, 4, 5,
6. The highest UDMA mode should be limited with opposite south bridge chipset.
You could get the detail information from your system operation book or
motherboard user guide.
The supported platform are described in System Requirement
section.
Please read
carefully before you download, install, or use any VIA SOFTWARE. VIA SOFTWARE
means the software program you are currently trying to download, and all
related updates supplied by VIA Technologies, Inc. (VIA).
By clicking on
the I ACCEPT button, and by downloading and installing the VIA SOFTWARE, you
accept all the terms and conditions of this Agreement. If you do not agree to the terms and
conditions of this Agreement, do not click the “I ACCEPT” button or use the VIA
SOFTWARE.
Upon your
acceptance of this Agreement, subject to the terms and conditions set forth
herein, VIA hereby grants to you a limited, non-exclusive, non-transferable,
worldwide license to use the VIA SOFTWARE as follows:
1. Use of Software. The VIA
SOFTWARE is licensed for personal use and may only be used in
conjunction with VIA products. If you wish to use the VIA SOFTWARE for commercial or any other purpose,
please contact VIA directly.
2. Restrictions. You are not allowed to modify,
disassemble, decompile, or reverse-engineering the VIA SOFTWARE, or remove any
proprietary notice or label on the VIA SOFTWARE. You may not transfer
or distribute this software to any third party.
3. Ownership and Copyrights.
The VIA SOFTWARE and the accompanying documentation are licensed, not
sold, to you. All title and copyrights in and to the VIA SOFTWARE (including
but not limited to all images, photographs, animations, video, audio, music,
text, and other information incorporated into the VIA SOFTWARE), the
accompanying printed materials, and any copies of the VIA SOFTWARE, are owned
by VIA, or its third party suppliers.
The VIA SOFTWARE is protected by copyright laws and international treaty
provisions.
4. Disclaimer of Warranty.
VIA MAKES NO REPRESENTATIONS ABOUT THE SUITABILITY, USE, OR PERFORMANCE
OF THE VIA SOFTWARE FOR ANY PURPOSE. THE VIA SOFTWARE IS PROVIDED "AS
IS," AND VIA DISCLAIMS, TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW,
ALL EXPRESS OR IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
NONINFRINGEMENT WITH RESPECT TO THE VIA SOFTWARE. VIA IS NOT OBLIGATED TO
SUPPORT OR ISSUE UPDATES TO THE VIA SOFTWARE.
5. Limitation on Liability.
TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW, UNDER NO CIRCUMSTANCES
SHALL VIA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT
LIMITATION, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR
MALFUNCTION, OR ANY AND ALL OTHER ECONOMIC LOSS OR COMMERCIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THIS VIA SOFTWARE, EVEN IF VIA HAVE BEEN
INFORMED OF THE POSSIBILITY OF SUCH DAMAGES.
6. Export Controls.
By clicking on the "I ACCEPT" button, you agree that the VIA
Software will not be shipped, transferred, or exported into any country or used
in any manner prohibited by the United States Export Administration Act or any
other applicable export laws, restrictions, or regulations.
7. Termination. Your license will automatically
terminate without notice from VIA upon any failure by you to comply
with the terms under this Agreement. Upon termination, you
must cease all use of the VIA SOFTWARE and destroy the
VIA SOFTWARE along with all copies and merged portions in any
form.
This package
should be installed on the system with VIA
This software package only supports Microsoft Windows© Platforms. The setup program will detect the current platform and install proper driver on your system. The supported platforms are list below:
Windows 2000 RTM and above
Windows XP RTM and above
Windows Server 2003 RTM and above
Not
available.
The setup program will display the released data
and version for this package at dialog title.
There is specific version syntax for package
identification:
The X is
the major version of this package; and YZ represents the minor version.
The
alphabetic is always appended after version field to represent the
qualification by Windows Hardware Qualification Lab. The A means the first
package for the same driver binary, B means the second released package for the
same driver binary, and so on.
In this section, we show the detail file list of ZIP-compressed package in which include setup and driver files.
0X0409.INI,
INSTMSIA.EXE, INSTMSIW.EXE,
ISSCRIPT.MSI,
License.rtf,
PCIENUM.SYS, README.TXT, SETUP.EXE,
Setup.ini,
SETUP.ISS, SETUP.MLF, SETUP.SCF,
viasetup.dll,
VIASetup.msi Readme.html
English.slf, asia.slf, europe1.slf, europe2.slf
europe3.slf, 165x300.bmp, 500x60.bmp
VBUSPORT
VBUSPORT\component.cif,
VBUSPORT \PortBusNT5.dll
Driver files: VIAIDE\Driver
Windows 2000, XP & Server
2003
|
XP2K\vIDEBUS.SYS |
|
|
XP2K \VIDEINST.DLL |
|
|
XP2K \viDEPORT.INF |
|
|
XP2K \viDEPORT.SYS |
|
|
XP2K\VPROPAGE.DLL |
|
|
XP2K\VIDEPORT.CAT |
Optional Digital Signature file |
VIDEFT
VIDEFT\component.cif,
VIDEFT\IDEFD.dll
Driver files: VIDEFT\
All platforms
|
VFSFD.SYS |
|
|
VIDEFD.SYS |
|
|
VIDEFD.INF |
|
|
VFSFD.INF |
|
There are two operation modes, Windows UI and command line, to execute installation and remove. The most popular is the Windows UI mode that provides convenient user interface and systematic operation. The command line mode, also called as silent mode, need user append more parameters behind SETUP.EXE as answer to make the setup program silence without pop any dialogs.
There are possible two types setup
package you may have. One is compressed as a zip file includes visible setup
and driver files. Another one is made as a self-extracted-execution file. In
the following, we will show you the steps to complete driver installation and
remove with both package types.
If the downloaded file is ZIP-compressed format, please extract it to proper location in your hard disk first. Then launch the SETUP.EXE by double-clicking. Otherwise, you could double-click the self-extracted-execution file and wait for few seconds for the self-extraction. The extracted file will be deleted automatically after setup has been terminated.
If it is the first time to execute the setup package, you will only have the choice of installation.
After the first time execution, you could have choice to make Update and Remove. You will see two options, Update and Remove in the first shown dialog. If you are going to update the driver, please active the Update radio button and press next button to enter next steps. Else, if you are going to remove the installed driver in your system, please active the Remove radio button and press next button to enter next steps.
There is another path to remove the installed driver is to go through “Add Remove Programs” service of control panel. An uninstall item is added after install , VIA Platform Device Manager, to handle all the installed VIA driver components. You could select the VIA IDE Bus Master item in the list box of Remove option.
The silent mode are usually applied to system maintainer for servicing hundreds systems that wont have interactive user interface. They would execute the setup through command line in console or batch file execution without closing any popped dialog popped or pressing next buttons. In addition, the command line parameters of these two types of downloaded file format get few differences.
In this type package, you could see a setup.exe in those extracted files. User could append parameters behind setup.exe as command line in console.
The
present command line parameters are: -s and /z"reboot;remove;kompnt:xx,yy,zz"
|
Parameter |
Description |
|
-s |
It is a required command line parameter to enable
silent mode operation. If this parameter is missed, the setup can’t execute
under silent mode. |
|
-zParam1;K;ParamN |
It passes predefined parameters to SETUP.EXE. Each
parameter, Param1;K;ParamN, should be separated with semicolons. The predefined sub-parameters are: reboot It causes Setup.exe automatically to reboot after the silent mode operation completed. remove It is
a switch to cause Setup.exe to
remove components. If this parameter is absent, then SETUP.EXE will install
components. kompnt:xx,yy,zz It is
an optional parameter to assign specific component in this package to be
install/remove. The xx,yy,zz
should be replaced with component name in which is defined as same as the
component folder name of this package. |
Examples:
|
Command line |
Execution
|
|
setup.exe -s |
Silent install all included components but not
reboot the computer. |
|
setup.exe -s /z"reboot" |
Silent install all component and reboot the
computer. |
|
setup.exe -s /z"reboot;remove" |
Silent uninstall all include component and reboot
the computer. |
|
setup.exe -s /z"remove" |
Silent uninstall all components but not reboot
the computer. |
|
setup.exe -s /z"kompnt:VIAMACH,VIAUDIO" |
Silent install VIAMACH and VIAUDIO components
only |
|
setup.exe -s
/z"remove;kompnt:VIAMACH,VIAUDIO" |
Silent uninstall VIAMACH and VIAUDIO components
only |
This type is a single self-extracted-execution file. All necessary files are all integrated together so that user does not need to extract it to specific folder for operation. There is extra parameter to make the self-extracted shell to be in silent mode.
The present command line parameters are -s -a, -s and /z"reboot;remove;kompnt:xx,yy,zz"
|
Parameter |
Description |
|
-s -a |
It is a required command line parameter to make the
self-extracted shell program to be in silent mode. And it should be the first
parameter in command line. |
|
-s |
It is a required command line parameter to enable
silent mode operation. If this parameter is missed, the setup |
|
-zParam1;K;ParamN |
It passes predefined parameters to SETUP.EXE.
Each parameter, Param1;K;ParamN, should be separated with semicolons. The predefined sub-parameters are: reboot It causes Setup.exe
automatically to reboot after the silent mode operation completed. remove It is
a switch to cause Setup.exe to
remove components. If this parameter is absent, then SETUP.EXE will install
components. kompnt:xx,yy,zz It is
an optional parameter to assign specific component in this package to be
install/remove. The
xx,yy,zz should be replaced with component name in which is defined as same
as the component folder name of this package. |
Examples:
We assume that you download a self-extracted-execution file named as VIAAGP.exe.
|
Command line |
Execution
|
|
VIAAGP.exe -s -a -s |
Silent install all included components but not
reboot the computer. |
|
VIAAGP.exe -s -a -s /z"reboot" |
Silent install all components and reboot the
computer. |
|
VIAAGP.exe -s -a -s /z"reboot;remove" |
Silent uninstall all included component and reboot
the computer. |
|
VIAAGP.exe -s -a -s /z"remove" |
Silent uninstall all components but not reboot
the computer. |
|
VIAAGP.exe -s -a -s
/z"kompnt:VIAMACH,VIAUDIO" |
Silent install VIAMACH and VIAUDIO components
only |
|
VIAAGP.exe -s -a -s /z"remove;kompnt:VIAMACH,VIAUDIO" |
Silent uninstall VIAMACH and VIAUDIO components
only |
The default-supported language in this package is in English.
If the executed Windows OS is in an un-supported language to this
package, the user interface will be represented in English.
This setup package support 33 languages as below
Chinese(Simplified), Chinese (Traditional), Indonesian,
Japanese, Korean, Russian,
Thai, Turkish.
Basque, Bulgarian, Catalan,
Croatian, Czech, Danish,
Dutch, English, Finish,
French(Canada), French(France), German,
Greek, Hungarian, Italian,
Norwegian, Polish, Portuguese(Brazi),
Portuguese(Portugal), Romanian, Serbian,
Slovak, Slovenian, Spanish,
Swedish.
All the
language sequence is arranged as alphabetical.
Limitation:
Not
found.
All copyrights are reserved by VIA Technologies,
Inc. http://www.via.com.tw/